+ Thickness core material
– Minimum thickness core material: 4 mm (A1, A2)
– Maximum thickness core material: 35 mm (A1, A2)
Exceptions For Solid Surface, Quartz composite, compact board and natural stone applies a minimum thickness of the core material (solid) of 10 mm. Maximum thickness same as all materials: 35 mm. See also Additional instructions Solid Surface.
+ Depth of worktop
– Minimum depth of worktop basis models: 600 mm (B1)
– Minimum depth of worktop XL models: 650 mm (B2)
Relevant read: What is the difference between basis and XL?
+ C-size
The C-size is the distance between the front of the worktop and the front side of the PITT unit.
– Minimum C-size basis models: 50 mm (C1)
– Minimum C-size XL models: 75 mm (C2)
+ Distance to sides of worktop
– Minimum distance between cut out and left or right side of worktop: 150 mm (D1, D2)
– Minimum distance between PITT unit and back of worktop, basis models: 47 mm (E1)
– Minimum distance between PITT unit and back of worktop, XL models: 72 mm (E2)
+ Relevant downloads
Images (IMG-ID**) as shown above are included in the document ‘Installation and handling instructions PITT cooking’, which can be downloaded below.
[useyourdrive dir=”0By1CxwZpYj8eZk9xWUg3dHZfVzg” mode=”files” viewrole=”administrator|editor|author|contributor|subscriber|guest” filesize=”0″ filedate=”0″ filelayout=”list” showcolumnnames=”0″ downloadrole=”administrator|editor|author|contributor|subscriber|guest” candownloadzip=”1″ showsharelink=”1″ roottext=”Home”]