Cut outs

IMPORTANT
The guidelines of the worktop manufacturer should always be strictly followed.

IMPORTANT
For application in Solid Surface, please take these additional instructions into account.

+ Distance to sides of worktop

– Minimum C-size PITT cooking basis models: 50 mm (C1)
– Minimum C-size PITT cooking XL models: 75 mm (C2)
– Minimum distance between cut out and left or right side of worktop: 150 mm (D1, D2)
– Minimum distance between PITT unit and back of worktop, basis models: 47 mm (E1)
– Minimum distance between PITT unit and back of worktop, XL models: 72 mm (E2)

+ Recess(es)

– The insides of the recess(es) should always be smooth and even.
– On the top and bottom of the recess(es); a facet of at least 1×1 mm should be applied.
(Exception for Solid Surface, see additional instructions Solid Surface)

+ Relevant downloads

[useyourdrive dir=”0By1CxwZpYj8eZk9xWUg3dHZfVzg” mode=”files” viewrole=”administrator|editor|author|contributor|subscriber|guest” filesize=”0″ filedate=”0″ filelayout=”list” showcolumnnames=”0″ downloadrole=”administrator|editor|author|contributor|subscriber|guest” candownloadzip=”1″ showsharelink=”1″ roottext=”Home”]