IMPORTANT The guidelines of the kitchen manufacturer and/or the manufacturer of the kitchen worktop should always be strictly followed. Additionally, it is very important to carefully follow the PITT step-by-step installation manual, included with each module.
+ Factsheet
| Essential parts | PITT module Worktop with cut outs (Prepared for Solid Surface?) Support bar |
| Needed tools | Screwdriver |
| Needed resources (See ‘Relevant downloads’ at bottom of page) |
File 1: Installation and handling instructions File 2: Installation manual Additional: Installation animation |
| Needed no. of people | 2 people are recommended, especially for models ≥ 4 burners (due to weight of unit). |
| Expected time | 15 minutes |
| Connection | 1/2″external thread connection |
+ Installation dimensions
| Distance | Basic models | XL models |
| Front worktop → front unit | 50 mm (C1) | 75 mm (C2) |
| Back unit → back worktop | 47 mm (E1) | 72 mm (E2) |
| Side cut out → side worktop | 150 mm (D1) | 150 mm (D2) |
| Worktop → top wall cabinets | 450 mm | 450 mm |
| Worktop → hood | 650 mm | 650 mm |
+ Before installation
- Please make sure to read files ‘PITT Installation and handling instructions’ and ‘PITT Installation manual’ carefully. Both files can be downloaded below.
- Additionally, you can watch our installation animation, which will globally guide you through the installation process.
- Please make sure to use file ‘PITT Design/Installation checklist’, part 1 (Material/Design) and part 2 (Cut-outs).
- In case of Solid Surface, please make sure to read these additional instructions.
+ After installation
- Please check if every single step from the manual has been taken into account.
- Please make sure to use ‘PITT Design/Installation checklist’, part 3 (Installation).
+ Relevant downloads
[useyourdrive dir=”0By1CxwZpYj8eZ2RYMjVGN1NPUmM” mode=”files” viewrole=”administrator|editor|author|contributor|subscriber|guest” filesize=”0″ filedate=”0″ filelayout=”list” showcolumnnames=”0″ downloadrole=”administrator|editor|author|contributor|subscriber|guest” candownloadzip=”1″ showsharelink=”1″ roottext=”Home”]